How lathe machine works?

Standard working system

  • All stock must be fittingly secured in the machine throw or mounted before the machining procedure occurring. Utilize the privilege estimated clip or tight clamp for the stock being machined.
  • Turn the chuck or faceplate by hand to guarantee there is no binding or danger of the work striking any piece of the lathe.
  • Check to guarantee the cutting tool won't keep running into the chuck or lathe dog. Feed away from the chuck or dogs if possible.
  • Before beginning the lathe, guarantee the axle work has the glass focus imbedded; tail, stock and device rests are safely clasped; and there is appropriate leeway for the pivoting stock.
  • Prior to beginning the lathe, guarantee that little distance across stock does not extend too a long way from the hurl without support from the tail stock focus.
  • When utilizing wood, don't mount a split work piece or one containing hitches.
  • When roughing stock, don't force the tool in the work piece or take too big a cut.
  • The operator should always be aware of the speed and direction of the carriage or cross-feed preceding to engaging the automatic feed.
  • Remember that never leave the key in the chuck. Try not let go of the key until it is free of the chuck and secured in its appropriate holding place.
  • Choose turning speed carefully. Large diameter stocks must be turned at a low speed. Always utilize the lowest speed to rough out the stock preceding last machining.
  • The right speed and feed for the particular material and cutting tool must be utilized. Stop the machine before making modification or measurements.
  • Don't remove the metal or wood chips from the table or stock by hand. Using a brush or other device to properly remove chips or shavings from the table or stock.
  • Never endeavor to run the chuck on/off the spindle head by drawing the power.
  • Don't stop the rotation of the chuck by switching the power to the lathe unless tapping holes.
  • Don't leave instruments, bits or overabundance pieces of stock on the lathe bed.
  • All belts and pulleys must be monitored. If frayed belts or pulleys are watched, the lathe must be removed from service and the belts or pulleys supplanted.
  • Stop the machine promptly if odd noise or excessive vibration happens.
  • Only appropriately sharpened drill bits and cutting devices in good condition should be utilized. Dull bores and chipped or broken cutting devices must be removed from service.
  • Separate the lathe from power source if doing repairs or servicing.
  • At the point when an administrator has got done with taking a shot at the lathe, and before leaving the machine for any reason, the power must be stopped and the machine must arrive at an entire stop.
  • At the point when an administrator watches a hazardous condition with the machine or stock being worked, the administrator must report it instantly to the assigned MSSA and the machine might be removed from administration until the issue has been redressed.

Component of the lathe machine

The lathe is a machine device that holds the workpiece between two rigid and strong supports called centers or in a chuck or face plate which revolves. The cutting device is rigidly held and supported in a device post which is fed against the revolving work. The typical cutting operations are performed with the cutting instrument fed either parallel or at right angles to the axis of the work.

The main components of the lathe are the bed, headstock, fast changing gear box, carriage and tailstock.
  1. Bed: the bed is a rugged, heavy casting in which are mounted the working components of the lathe. It carries the headstock and tail stock for supporting the workpiece and gives a base for the movement of carriage assembly which carries the tool.
  2. Legs: the legs carry the whole load of machine and are firmly secured to floor by foundation bolts.
  3. Headstock: the headstock is clamped on the left hand side of the bed. It serves as housing for the driving pulleys, back gears, headstock spindle, live centre and the feed reverse gear. The headstock spindle is a hollow cylindrical shaft that gives a drive from the motor to work holding devices.
  4. Gear Box: the quick change gear box is placed below the headstock and contains a number of different sized gears.
  5. Carriage: the carriage is situated between the headstock and tailstock. It serves the purpose of supporting, guiding and feeding the component against the job during operation. The main parts of carriage are:
    • The saddle: is an H-shaped casting mounted on the top of lathe ways. It offers support to cross-slide, compound rest and tool post.
    • The cross slide: is mounted on the top of saddle. It gives a mounted or automatic cross movement for the cutting tool.
    • The compound rest: is fitted on the top of cross slide and is utilized to support the device post and the cutting device.
    • The tool post: is mounted on the compound rest and it rigidly clamps the cutting device or device holder at the proper height relative to the work centre line.
    • The apron: is fastened to the saddle. It houses the gears, clutches and levers required to move the carriage or cross slide. The engagement of splitting the nut lever and the automatic feed lever at the same time is prevented she carriage along the lathe bed.
  6.  Tailstock: the tailstock is a portable casting located opposite the headstock on the ways of the bed. The tailstock can slide along the bed in order to accommodate different lengths of workpiece between the centers. A tailstock clamp is given to lock the tailstock at any desired position. The tailstock spindle has an internal taper that holds the dead centre and the tapered shank tools such as reamers and drills.
In order to get an efficient process and beautiful surface at the lathe machining, the tailstock is important to adjust a rotating speed, a cutting depth and a sending speed. Kindly note that the essential elements can not decide easily because these suitable values are quiet different by materials, size and shapes of the part.

Choosing the best metal lathe 2017

Do you want to look for the best metal lathe of 2017? Well, there are so many types of metal lathes available, you simply narrow down by considering some factors to get the best one suitable for your business.
Some factors must be considered before buying a metal lathe:
  • Size of the lathe as per space: consider the type of work and available space. If it's a small workshop or home, a lathe between 6”x15” and 12”x30” may be met your needs. If the work is in a corner, you may require a smaller machine. But if the work is done in a large workshop, you should buy the best metal lathe as per your budget.
  • American vs European size: there is a difference from the size in American and European
  • Headstock bearings: most of the metal lathes have headstock bearings that help the lathe handle all loads. A lathe which utilizes ball or taper roller bearings in its headstock should be considered. You can replace or repair these bearings easily after they become worn. These bearings also reduce the maintenance cost of the headstock.
  • Backgear system: a lathe needs to manage huge distance across workpieces. Thus, it ought to be outfitted with speed control to cut strings or for substantial obligation operations. These all should be possible if a backgear framework is introduced at the back of the headstock.
  • Spindle speed: the best metal machine highlights variable speed engine control to control shaft speed. The range ought to begin from 30 to 80 RPM and have the limit of going up to about 1200 RPM. A few machines have higher speed extend yet it's frequently pointless aside from you have an overwhelming obligation operation.
  • Screwcutting: you lathe ought to have the capacity to do Screwcutting which needs moderate paces of between 25-70 RPM. You require design driven low speeds for effective Screwcutting. Decide on a costly machine that incorporates a Screwcutting gearbox and is truly productive.
  • Tool holders: the best metal lathe accompanies a choice of hardware holders (4-way toolpost), each with its own device which can be exchanged quickly as required.
  • Slide rests: consider the element 'compound slide rest' while purchasing a metal machine. This convenient slide component helps the machine move over the bed.
  • Tumbler reverse: this great feature is found only in the quality lathes and it has the effect of reversing the direction of the carriage’s travel.
  • Morse taper: the best metal lathe includes a morse decrease in the tailstock and headstock. As far as size, a no.2 or 3 morse is generally prescribed as no. 1 is really hard to work with. 
  • Gap bed lathe: this great component alongside Backgear limit helps your machine be fit for functioning admirably past its general station. 
  •  Drive system: many metal lathes highlight V-belt drive system

Choosing the best wood lathe 2017

Do you want to choose the best wood lathe of 2017? Well, there are some factors you need to consider first before making a buying decision. You also consider your requirements to see if which lathe satisfies for your work
  • Motor: the motor decides how fast the wood can be cut. It is a very important factor. If you want to cut the heavy products, you can't choose a very small motor, the product can be damaged and the shaping tool can chatter
  • Power: the lathe's power can be analyzed with some features. The capacity of motor and the speed that it can effectively run contribute to the whole power. The strong device is suitable for handling the difficult projects
  • Speed: most of the lathes can be rotated at different speeds for having the wished output. Benchtop lathes require quicker rotation while bowl lathes do not. For beginners, they should choose a lathe which has adjustable speeds. The lathe with speed less than 2000rpm may be better for newbies.
  • Size & Build: the size must be suitable for project types. The smaller projects can require a mini lathe while a floor lathe is stronger and it is more capable of handling bigger projects, however, it requires more places also.
  • Weight: a heavier lathe may be more consistent and it won’t require extra weights for keeping it in place. A lightweight device may be easy to move out of place with quicker speeds or more complex jobs
  •  Stability: the turning speed will affect its sturdiness and stability. A better lathe should be heavy and tough for bearing blows and remain safe place for avoiding unexpected mistakes happened by movement. 
  • Noise: the best lathe should be noiseless. It not only prevent disturbing noise in the workplace but also allows the turner to hear how the cutting tool working accurately.
  • Ease of use: it's great to have a lathe which is sufficiently proficient in handling the important tasks while as yet being sufficiently simple to use
  • Vibration: a lightweight lathe is more susceptible to vibration that may compromise the ultimate item.
  • Capacity: a lathe with larger distance between center enables for bigger wood pieces for being turned.
  • Types of wood: a type of wood may be fitted for some devices, you should decide which lathe would be best to buy
  • Price: the lathes which make the quality ultimate items can be expensive. While some cheaper models can compromise the quality of items. You must have the plan to use it before making the buying best one for your need.
If you find a lathe that meets all above mentioned factors, it is certainly the best lathe to purchase. Lathe is a great device for your business projects and we hope you will find the best one after reading this tutorial.